Install The Client Software In A Client Workstation - NEC NVM-2000 Installation Manual

Install the Client Software in a Client Workstation

Issue 1-0
The files for the Client Software for the Fax Server is also on the Fax Server Distribution 1.02
CD.
To install the Fax Server Client Software on a workstation:
You must close all programs before you begin the installation. This includes any e-
mail and any virus protection programs.
To install the Fax Server Client Software:
1. Close all programs (if you have not already done so).
2. The Fax Server Distribution 1.02 CD should still be in the CD-ROM drive of the client
computer. (If it is not, insert it into the CD-ROM drive now.)
3. Click Start Run.
Click Browse.
4.
5. In the Browse window, click in the Look in box for the CD-ROM drive of the computer.
6. Double-click to open the file labeled Fax Server Distribution 1.02.Then double-click to
open the following subsequent file folders:
Cd
NTK
7. You will see two file folders that contain installation files for client computers with Windows
95/98 and files for client computers with Windows NT 4.0, as shown below.
Double-click to open the appropriate file folder for the computer on which you are installing
the software.
You then see a screen similar to the following:
Double-click on NVM Fax Server Client.
8.
Installing Fax Server
Setting Up the Client WorkStation
IMPORTANT
9