Your Comand Equipment; Display Settings; Time Settings; Setting - Mercedes-Benz COMAND Operating Instructions Manual

Time settings

42

Your COMAND equipment

These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your
COMAND system may not be equipped with
all the features described.

Display settings

Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
Press W.
X
Select Settings Settings
X
COMAND controller and press W to con-
firm.
Select Display Display
X
Select Brightness Brightness
X
firm.
Adjust the brightness by turning cVd the
X
COMAND controller and press W to con-
firm.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
by turning cVd the
and press W to confirm.
and press W to con-
design by manually selecting day or night
design, or opt for an automatic setting.
Press W.
X
Select Settings Settings by turning cVd the
X
COMAND controller and press W to con-
firm.
Select Display Display and press W to confirm.
X
Select Day Mode Day Mode, Night Mode Night Mode
X
matic matic by turning cVd the COMAND con-
troller and press W to confirm.
A dot indicates the current setting.
Design Explanation
The display is set perma-
Day Mode Day Mode
nently to day design.
Night Mode Night Mode The display is set perma-
nently to night design.
Automatic Automatic If the
is selected, COMAND
evaluates the readings
from the automatic vehi-
cle light sensor and auto-
matically switches
between the display
designs.
Time settings
General information
If COMAND is equipped with a navigation sys-
tem and has GPS reception, COMAND auto-
matically sets the time and date. You can
change the time in minute increments. The
date can also be changed.
i
If you adjust the time in minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
ard time are lost. Switching between
summer and standard time (
or Auto‐ Auto‐
Automatic Automatic

setting

page 43).
Y