Disassembly
Disassemble the evaporator
• Screw off the fixing screws of evaporator left side
and right side (2 pcs for each side), then lift the
evaporator left side up, and remove it backward,
can take down the evaporator.
• When repair, do not damage the Caution label.
7.
Disassemble the motor and cross flow fan
•
Screw off 4pcs screw from the motor clamp,
then take down the motor clamp.
•
Screw off the screws which connect with the
cross flow fan and motor, then can pull out
the motor can take down the motor and cross
flow fan.
33 Service Manual
Screws
Screws
Motor clamp
Screw
Cross flow fan
Motor