Epson PhotoPC700 Service Manual page 23

MACRO MODE
Y
Operation method: Same as PhotoPC600
Y
Shooting range:
NORMAL PLAYBACK MODE
Procedure
Order
1 Set LCD monitor mode switch to "Playback". Playback mode
2
Navigation button(
previous image.
Navigation button(
image.
MULTI-PHOTO PLAYBACK MODE
Procedure
Order
1 Set LCD monitor mode switch to "Playback".
2 Press SELECT switch.
3 Press navigation switches several times and
indicate "Playback mode" on the screen.
4 Everytime SELECT switch is pressed, it
switches over Normal→Multi.
5 Press "BACK" switch, selecting "Multi-photo".
MAGNIFICATION INDICATION
Procedu
re order
1 Set LCD monitor mode SW to "Playback".
2 Indicate the image to enlarge by using
navigation switches. In case of multi-photo
playback, selected image is indicated with
white frame.
3 Press SELECT switch.
4 Select "Magnification display" by using
navigation switches.
5 Press SELECT switch.
6 Select the area you want to magnify by
navigation switches.
Currently selected area can be seen at left
top of the screen.
7 Press BACK switch to go back to Normal
Playback mode or Multi-photo playback.
Rev. A
10cm∼15cm
Table 1-16. Setting for Normal Playback Mode
Operation switch

"/
) to go back to the

/ ) to go to the next
Table 1-17. Setting for Multi-Photo Playback Mode
Operation switch
Table 1-18. Setting for Magnification Indication
Operation switch
Chapter1 Product Description
Camera mode
(LCD monitor
menu)
Camera mode
(LCD monitor menu)
Playback mode
Setting mode
Playback mode
Multi-photo playback
mode.
Camera mode
Normal playback
mode or
Multi-photo
playback
Setting mode.
Magnification
mode.
Magnification
mode.
Selection of
magnification part
mode.
Selection of
magnification part
mode.
PhotoPC 700
Note
Note
Note
Only central image
is magnified.
1-15