Innova Can OBD2 Owner's Manual page 41

Current DTCs,
Readiness DTCs
1. Use the UP
as necessary, to highlight the desired
option, then press the ENTER/LD
button.
A "One moment please" message
displays,
retrieves the selected DTCs.
If the Scan Tool fails to link to the
vehicle's
Failed" message shows on the Scan
Tool's Display.
- Verify the ignition is ON, then
press the ENTER/LD
to continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 12 for a description
of LCD display elements.
A visible
through the vehicle's DLC connector.
A visible
(communicating with) the vehicle's computer.
The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are shown in
the lower section of the LCD display.
The Scan Tool will display a code only
if codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently stored in the vehicle's
computer" is displayed. Press the
ENTER/LD
Toyota/Lexus Enhanced menu.
OBD2
Historical DTCs
and DOWN
while the Scan
computer, a
icon indicates that the Scan Tool is being powered
icon indicates that the Scan Tool is linked to
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
button to return to the
Using the Scan Tool
VIEWING ENHANCED DTCs
or
buttons,
Tool
"Linking
button
39