Innova Can OBD2 Owner's Manual page 10

About the Scan Tool
ADJUSTMENTS AND SETTINGS
3. Press the DOWN
(make the display lighter).
4. When the desired brightness is obtained, press the ENTER/LD
button to save your changes and return to the MENU.
Searching for a DTC Definition Using the DTC Library
1. Use the UP
as necessary, to highlight DTC Library
in the MENU, then press the ENTER/LD
button.
The Enter DTC screen displays. The
screen shows the code "P0001",
with the "P" flashing.
2. Use the UP
as necessary, to scroll to the desired
DTC type (P=Powertrain, U=Network,
B=Body, C=Chassis), then press the
DTC SCROLL
The selected character displays "solid",
and the next character begins flashing.
3. Select the remaining characters in the DTC in the same way,
pressing the DTC SCROLL
When you have selected all the DTC characters, press the
ENTER/LD
If you entered a "Generic" DTC
(DTCs that start with "P0", "P2" and
some "P3"):
- The selected DTC and DTC
definition (if available) show on
the Scan Tool's display.
If a definition for the DTC you
entered is not available, the "To
Link" screen displays.
If you entered a "Manufacturer-Specific" DTC (DTCs that start
with "P1" and some "P3"):
- The "Select Manufacturer" screen
displays.
- Use the UP
buttons, as necessary, to high-
light the appropriate manufacturer,
then press the ENTER/LD
button to display the correct DTC
for your vehicle.
8
button to increase the brightness of the display
and DOWN buttons,
and DOWN buttons,
button.
button to confirm each character.
button to view the DTC definition.
and DOWN
OBD2