Innova Can OBD2 Owner's Manual page 15

2. Monitor icons - Indicate which Monitors are supported by the
vehicle under test, and whether or not the associated Monitor has
run its diagnostic testing (Monitor status). When a Monitor icon is
solid, it indicates that the associated Monitor has completed its
diagnostic testing. When a Monitor icon is flashing, it indicates that
the vehicle supports the associated Monitor, but the Monitor has not
yet run its diagnostic testing.
3. Vehicle icon - Indicates whether or not the Scan Tool is being
properly powered through the vehicle's Data Link Connector (DLC).
A visible icon indicates that the Scan Tool is being powered through
the vehicle's DLC connector.
4. Link icon - Indicates whether or not the Scan Tool is
communicating (linked) with the vehicle's on-board computer. When
visible, the Scan Tool is communicating with the computer. If the
Link icon is not visible, the Scan Tool is not communicating with the
computer.
5. Computer icon - When this icon is visible it indicates that the
Scan Tool is linked to a personal computer. An optional "PC Link
Kit" is available that makes it possible to upload retrieved data to a
personal computer.
6. Scan Tool Internal Battery icon - When visible, indicates the
Scan Tool batteries are "low" and should be replaced. If the
batteries are not replaced when the battery symbol
LEDs will light up as a last resort indicator to warn you that the
batteries need replacement. No data will be displayed on screen
when all 3 LEDs are lit.
7. DTC Display Area - Displays the Diagnostic Trouble Code (DTC)
number. Each fault is assigned a code number that is specific to that
fault.
8. Test Data Display Area - Displays DTC definitions, Freeze Frame
data, Live Data and other pertinent test information messages.
9. FREEZE FRAME icon - Indicates that there is Freeze Frame data
from "Priority Code" (Code #1) stored in the vehicle's computer
memory.
10. HISTORY icon - Indicates the currently displayed DTC is a "History"
code.
11. PENDING icon - Indicates the currently displayed DTC is a
"Pending" code.
12. MIL icon - Indicates the status of the Malfunction Indicator Lamp
(MIL). The MIL icon is visible only when a DTC has commanded the
MIL on the vehicle's dashboard to light.
13. Code Number Sequence - The Scan Tool assigns a sequence
number to each DTC that is present in the computer's memory,
starting with "01." This number indicates which code is currently
displayed. Code number "01" is always the highest priority code,
and the one for which "Freeze Frame" data has been stored.
OBD2
Scan Tool Controls
DISPLAY FUNCTIONS
is "on", all 3
13