About the Scan Tool
ADJUSTMENTS AND SETTINGS
Setting the Unit of Measurement
1. Use the UP
as necessary, to highlight Unit of
Measurement in the MENU, then press
the ENTER/LD
2. Press the UP
as necessary, to highlight the desired
Unit of Measurement.
3. When the desired Unit of Measurement
value is selected, press the ENTER/LD
button to save your changes.
Exiting the MENU Mode
1. Use the UP
Menu Exit in the MENU, then press the ENTER/LD
The display returns to the DTC screen (if data is currently stored
in the Scan Tool) or to the "To Link" message (if no data is
currently stored in the Scan Tool).
10
and DOWN
buttons,
button.
or DOWN
button,
and DOWN
buttons, as necessary, to highlight
button.
OBD2