Innova Can OBD2 Owner's Manual page 11

If a definition for the DTC you
entered
advisory message shows on the
CanOBD2 Scan Tool's display.
4. If you wish to view definitions for
additional DTCs, press the ENTER/LD
button to return to the Enter DTC
screen, and repeat steps 2 and 3.
5. When all desired DTCs have been viewed, press the ERASE
button to exit the DTC Library.
Using the Backlight
1. Use the UP
as necessary, to highlight Display
Backlight in the MENU, then press the
ENTER/LD
The Display Backlight screen dis-
plays.
2. Press the UP
as necessary, to select the desired
backlight mode, either ON or OFF.
3. When the desired backlight mode is
selected, press the ENTER/LD
button to save your changes.
The display returns to the MENU,
and the backlight turns "on" or "off"
as selected.
Selecting the Display Language
1. Use the UP
as necessary,
Language in the MENU, then press the
ENTER/LD
The Select Language screen dis-
plays.
The
Language is highlighted.
2. Press the UP
as necessary, to highlight the desired
display language.
3. When the desired display language is
highlighted, press the ENTER/LD
button to save your changes and return
to the MENU (shown in the selected
display language).
OBD2
is not available,
and DOWN
button.
or DOWN
and DOWN
to highlight
button.
currently selected
or DOWN
About the Scan Tool
ADJUSTMENTS AND SETTINGS
an
buttons,
button,
buttons,
Select
display
button,
9