Chain Dialing - Uniden Elite 9135 Owner's Manual

For individual entry options, find a number and press
display the following options:
To...
save this mobile
phonebook entry to
the home phonebook
edit the current entry
delete the current
entry
Adding Phonebook Entries (Home only)
With the phone in standby, open the phonebook. Select
Create New. Enter a name and number and select a personal ring.
Enter the phone number (up to 20 digits) exactly as you would dial it.
♦
If you need the phone to wait before sending the next set of digits,
♦
press
RedIal/Pause
pauses, but each one counts as a digit (you'll see
To edit the name, press
♦
a letter. Press
To edit the number, press
♦
delete numbers. Re-enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Select the phone
name and then Delete

Chain Dialing

If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Make your call normally.
2. When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
3. Press
menu/select
just close the phonebook.
16
Press...
menu/select
Store Into PH
menu/select
menu/select
Delete. To confirm, select Yes.
to insert a 2-second pause. You can insert multiple
PHoneBook
to delete a letter.
InteRcom/cleaR
InteRcom/cleaR
All. To confirm, select Yes.
twice to send the code. If you change your mind,
twice to open the menu, then select
BK.
twice to open the menu, then select Edit.
twice to open the menu, then select
to move the cursor back and insert
to back up the cursor and
twice to
menu/select
Home and then
P in the display).