Uniden Elite 9135 Owner's Manual page 7

6. When your phone accepts the Bluetooth connection, the Elite 9135
sounds a confirmation tone. The Bluetooth device number icon on the
base and the handset display light up.
Most mobile phones automatically transfer the audio to a Bluetooth
#
device as soon as it pairs; if yours does not, look in your mobile
phone's Bluetooth setup for a "transfer audio" or "send audio to
device" option.
To test the connection
1. Pick up the handset from the cradle.
2. Dial the number you want to call, then press
You may not hear a dial tone or ringing, but the handset display says
Talk.
3. Make sure the call connects and you can hear clearly. (When you're
finished, press
The Elite 9135 remembers the pairing information for your mobile
♦
phone; if it loses connection with your phone for any reason (e.g.,
the mobile phone travels out of range, runs out of charge, etc.), the
Elite 9135 can automatically reconnect the next time your phone
becomes available.
Using the Elite 9135 with four Bluetooth phones
The Elite 9135 can save the pairing information for four different
♦
Bluetooth phones, but it can only use one mobile line at any given
time. For example, if you pair the Elite 9135 to four Bluetooth phones,
when you press
phone you want to connect to.
If you are using the Elite 9135 to talk on one Bluetooth phone, the
♦
Elite 9135 will not ring if a call comes in on another phone.
You can set a different ring tone for each paired mobile phone (see
♦
page 9).
To pair another Bluetooth phone, just repeat the pairing procedure
♦
with the new phone. (If the paired phones interfere when you're
pairing the new one, just turn off Bluetooth on any paired phones until
you finish pairing the new one.)
to hang up.)
end
on the handset, the Elite 9135 asks which
moBIle
on the handset.
moBIle
5