Sfps, Gigabit (1000Mbps) Port Modules - GarettCom Magnum 6KQ Installation And User Manual

Magnum 6KQ Managed Field Switch Installation and User Guide
•
In the case where the 48VDC power in not internally connected and no power
is coming to the PoE ports for some reason, all the PoE port LEDs are ON
simultaneously to indicate a trouble condition. The ports will still operate
properly for data traffic.
5.2.11

SFPs, Gigabit (1000Mbps) port modules

The Magnum 6KQ offers a Gigabit option with multiple choices of copper
10/100/1000Mbps or Gigabit SFP Fiber modules for the modular slot. While up to two
Gigabit modules
(maxm.) can be
configured in the
modular slot D only.
The 6KQ
Modules provide a
GBIC opening for
insertion of
industry-standard
SFPs to provide
Gigabit (Gb) media
flexibility. SFP fiber Transceivers are available with both multi-mode (550m) at 850nm
and single-mode at 1330nm (10, 25, 40, 70)km fiber options, and for Gigabit copper as
well, with new models appearing often.
The 1000Mb Gigabit SFP fiber-port modules on the Magnum 6KQ are
normally set (factory default) to operate at AUTO mode for best fiber distance and
performance. Only two Gigabit ports can be configured on a Mangum 6KQ managed
switch in slot D.
There are three LEDs provided on each SFP Gigabit port module. The SFP Gigabit fiber
has LEDs that indicate LK (Link status) and ACT (receiving activity) when lit and F/H
(on for Full and OFF for half duplex) for that port.
The copper Gigabit port supports 10/100/1000Mb speeds. The three LED's show the
speed the connection has achieved. It is set as AUTO by default. All other LEDs are the
same as the SFP fiber.
www GarrettCom com .
4 4 4
1 1
.
6KQ-2GSFPCU 6KQ-2GSFPCU
1 Port@ 10/100/1000Mbps, 1 Port at 1000Mb SFP 1 Port@ 10/100/1000Mbps, 1 Port at 1000Mb SFP
1 1 1
LINK LINK LINK
3 3 3
ACTIVITY ACTIVITY ACTIVITY
42
(04/07)
2 2
2 2 2
10/100/1000 10/100/1000 10/100/1000
4 4 4
FULL/HALF FULL/HALF FULL/HALF
3 3 3