Table of Contents
Advertisement
Magnum 6KQ Managed Field Switch Installation and User Guide
Power Consumption:
35 watts worst case (for a fully loaded fiber model)
12 watts typical (for a small 4 port copper-only model)
Dual DC Power Input (Optional)
A Dual-Source option is available for the 12VDC, 24VDC, –48VDC, and
125VDC models (not the 250VDC model) This provides for continuity
operation when either of the DC input sources is interrupted.
and C.
The Dual-Source Terminal Block is marked : " –A, -B, +A, +B "
6KQ Mounting:
Vertical mounting normal. Suitable for wall or DIN-Rail mounting (6KQ)
Agency Approvals and Standards Compliance:
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15 Class A
NEBS Level 3 and ETSI Compliant
IEEE 1613 Class 2 Environmental Standard for Electric Power Substations
See also Note for Power Substations in Section 3.2.4, 3.7, and 5.2.9
IEC 61850 EMC and Operating Conditions Class C for Power Substations
NEMA TS-2 and TEES for DC-powered and PoE-powered traffic control
equipment
Class1 Division 2 and ATEX for hazardous locations, pending
Warranty: Three years, per UL 60950 temperature rating
See the Configuration Guide on the GCI web site at
http://www.garrettcom.com/techsupport/insertion_guides/6kqcg.pdf
for configurations and options..
Email
info@GarrettCom.com
www GarrettCom com
.
.
for additional information.
3
(04/07)
of
See Appendices B
Made in USA
Advertisement
Table of Contents
