6Kq2-Mst, 2@100Mb Mm Fx-St "Twist Lock" Module; Magnum 6Kq Managed Field Switch Installation & User Guide 04/07); 1A 6Kq2-10St, 2@10Mb Mm Fx-St "Twist Lock" Module - GarettCom Magnum 6KQ Installation And User Manual

Magnum 6KQ Managed Field Switch Installation and User Guide
Each 6KQ Port Module (PM) is individually described in the following sections.
For the "6KF-series" fiber modules in slot C, the operational description is the
same as the corresponding fiber modules configured in slots B and D described below.
5.2.1 6KQ2-MST, 2@100Mb multi-mode FX-ST "twist lock" Combo
Module
The Magnum 6KQ2-MST is two port ST fiber module at 100MB. The module
is equipped with dual-mode
ST-type connectors and
dual speed copper ports.
The ST-connector functions
as a fiber optic transceiver
to support 100BASE-FX
network segments. When
installed in a Magnum 6KQ
Managed Switch, the
copper port supports the standard distance 100m on each port and the fiber port supports
fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically
2km at full-duplex and 412m at half-duplex.
Each port has an Activity (ACT) LED indicating packets being received. A
Link (LK) LED indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (half-duplex when off).
5.2.1a 6KQ2-10ST, 2@10Mb multi-mode FX-ST "twist lock" Module
The 6KQ2-10ST is a two port Fiber module that looks similar to the
100MbFiber module with the
exception of 10Mb speed at
the ST fiber module. The ST-
connector functions as a fiber
optic transceiver to support
10BASE-FX network
segments. When installed in a
Magnum 6KQ Managed
www GarrettCom com . .
36
(04/07)