Headrest Mounting:
1) Remove the headrest from the
vehicle for easiest installation.
2) Lay headrest on a flat surface.
3) Center trim collar on headrest
as shown.
NOTE: Depending on the angle of
the headrest the Trim Ring and
housing may be mounted upside
down.
4) Using a permanent marker,
mark headrest material along
the interior of the Trim Ring.
5) Remove the Trim Ring and
mark an "X" from corner to cor-
ner as shown.
Mounting
Trim
Monitor
Tray
Ring
8
128-6324
9 of 22
Headrest