Specifications; Declaration Of Conformity - JBL Performance Specialist SS6 Owner's Manual

SPECIFICATIONS

SS6 SS8
Frequency Response Frequency Response
38Hz – 20kHz (–10dB) 30Hz – 20kHz (–10dB)
Recommended Maximum Recommended Maximum
Amplifier Power † Amplifier Power
100 watts 120 watts
Impedance Impedance
8 ohms nominal 8 ohms nominal
Sensitivity Sensitivity
88dB (2.83V/1m) 90dB (2.83V/1m)
Crossover Frequency Crossover Frequency
2,800Hz 2,000Hz
Woofer Woofer
6-1/2" Polymer-coated 8" Polymer-coated
aluminum cone w/rubber aluminum cone w/rubber
surround surround
Tweeter Tweeter
1" Pure-titanium dome, 1" Pure-titanium dome,
w/Elliptical Oblate w/Elliptical Oblate
Spheroidal (EOS) wave- Spheroidal
™
guide, and swivel mount guide, and swivel mount
Plate Size (W x H) Plate Size (W x H)
8-1/2" x 11" 10-1/8" x 13-1/8"
(216mm x 279mm) (257mm x 333mm)
Mounting Cutout Size Mounting Cutout Size
(W x H) (W x H)
7-1/8" x 9-11/16" 8-7/8" x 11-13/16"
(181mm x 246mm) (225mm x 300mm)
Mounting Depth Mounting Depth
3-7/8" (98mm) 4" (102mm)
Weight per Speaker Weight per Speaker
4.7 lb (2.1kg) 5.5 lb (2.5kg)
JBL and Harman International are registered trademarks,
and Performance Series, Pro Sound Comes Home, Elliptical
Oblate Spheroidal and Straight-Line Signal Path are trademarks,
of Harman International Industries, Incorporated.
Dolby is a registered trademark of Dolby Laboratories.
DTS is a registered trademark of DTS, Inc.
†
The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We
do not recommend sustained operation at these maximum
power levels.
All features and specifications are subject to change
without notice.
OWNER'S GUIDE
PRODUCT LINE:
PERFORMANCE
MODELS:
SS6, SS6C, SS8, SS8C, SSLCR, SS6DT
Combine the superior performance of traditional
DESIGN GOAL:
JBL loudspeakers with the convenience of in-wall installation.
Pure-titanium dome with Elliptical Oblate Spheroidal
TWEETER TYPE:
waveguide, and swivel mount
(EOS)
Polymer-coated aluminum cone with rubber surround
WOOFER TYPE:
CROSSOVER NETWORK:
PROFESSIONAL REFERENCE:
SSLCR
Frequency Response
40Hz – 20kHz (–10dB)
Recommended Maximum
† Amplifier Power
120 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,600Hz
Woofer
Dual 5" polymer-coated
aluminum cone w/rubber
surround
Tweeter
1" Pure-titanium dome,
w/Elliptical Oblate
(EOS) wave- Spheroidal
™ ™
guide, and swivel mount
Plate Size (W x H)
15-3/8" x 7-1/2"
(391mm x 191mm)
Mounting Cutout Size
(W x H)
13-7/8" x 6-3/16"
(352mm x 157mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
5.7 lb (2.6kg)
™ SPECIALIST
Straight-Line Signal Path ™ (SSP)
Studio Monitor
SS6C
Frequency Response
40Hz – 20kHz (–10dB)
Recommended Maximum
† Amplifier Power †
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,400Hz
Woofer
6-1/2" Polymer-coated
aluminum cone w/rubber
surround
Tweeter
1" Pure-titanium dome,
w/swivel mount
(EOS) wave- Plate Size (Diameter)
9-3/16" (233mm)
Mounting Cutout Size
(Diameter)
7-7/8" (200mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
4.2 lb (1.9kg)

Declaration of Conformity

We, Harman Consumer Group International
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the products
described in this owner's manual are in compliance
with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
PRO SOUND
COMES HOME
JBL, Incorporated
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL (4525) (USA only) www.jbl.com
For new-construction applications, be sure
NOTE:
to purchase the correct rough-in frame kit.
™
© 2006 Harman International Industries, Incorporated.
All rights reserved.
Part Nos. 406-000-05361-E 170-1035
SS6DT
Frequency Response
40Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
120 watts (60 WPC)
Impedance
8 ohms nominal per input
Sensitivity
89dB (2.83V/1m)
Both channels driven
Crossover Frequency
2,900Hz
Woofer
6-1/2" Polymer-coated
aluminum cone w/rubber
surround
Tweeter
Dual 3/4" pure-titanium
dome, w/swivel mount
Plate Size (Diameter)
9-3/16" (233mm)
Mounting Cutout Size
(Diameter)
7-7/8" (200mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
4.2 lb (1.9kg)
Laurent Rault
Harman Consumer Group International
Château du Loir, France 3/06
™
SS8C
Frequency Response
32Hz – 20kHz (–10dB)
Recommended Maximum
Amplifier Power †
120 watts
Impedance
8 ohms nominal
Sensitivity
90dB (2.83V/1m)
Crossover Frequency
2,200Hz
Woofer
8" Polymer-coated
aluminum cone
w/rubber surround
Tweeter
1" Pure-titanium dome,
w/swivel mount
Plate Size (Diameter)
10-7/8" (276mm)
Mounting Cutout Size
(Diameter)
9-1/2" (241mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
4.6 lb (2.1kg)