® We’re confident that this JBL system will provide every note The SB300 is a two-piece home theater speaker system that of enjoyment that you expect – and that when you think about includes a powered stereo soundlbar speaker, a wireless 8-inch...
Mute Button (remote control only): Press the Mute button to Power mute the SB300 system. (The Power indicator flashes blue.) While Button On/Off the system is muted, press the Mute button again or the Volume Up button to restore the sound.
Status Power Switch Level Control Cutoff Control Power Cord Connector Wireless Pairing Switch status Led: Level control:cutoff control: Phase switch:Wireless Pairing switch: Power switch:Power cord connector: www.jbl.com...
sPeaker Placement PLaciNg tHe sOuNdBar ON a taBLe PLaciNg tHe suBWOOFer If your TV is placed on a table, you can place the soundbar on the The performance of a subwoofer is directly related to its placement table directly in front of the TV stand, centered with the TV screen. in the listening room and its physical position relative to the other As long as the surface of the table is flat, the soundbar will rest on its speakers in the system.
AC outlets. Do NOT plug these cords into the to the soundbar’s Source 2 (optical digital) input. accessory outlets found on some audio components. sB300 soundbar Power Cord Stereo...
usiNg YOur sOuNdBar sYsteM turNiNg tHe sOuNdBar ON aNd OFF PairiNg tHe uNits FOr WireLess OPeratiON Set the soundbar’s Power switcn to the “On” position. After turning the soundbar and subwoofer on for the first time, you will need to “pair” the subwoofer and soundbar so they both operate at the same wireless frequency.
Listen to several different music recordings and film soundtracks that contain strong bass passages, and find a setting for the Level knob that doesn’t over-emphasize the bass or make it sound weak. sB300 POWered sOuNdBar sPeaker Two 2" (51mm) cones per channel, video- Low-frequency transducer: shielded Level One 1"...