JBL PARTYBOX 1000 Quick Start Guide

Note:

• For more information, please download the owner's manual from www.jbl.com

Overview

Top panel

• Press to switch light show patterns.
• Press and hold for 2 seconds to turn the strobe light on or off.

• Power on/off.

• Short Press to enter Bluetooth pairing mode.
• Press and hold for 20 seconds to disconnect and pair with a new device.

• Press repeatedly to select a music source (Bluetooth / USB / AUX / LINE IN).

• LED indicators to show the current music source.

• DJ control keys.

• Press to record a new track. Up to 8 tracks can be recorded.

• Press to delete the last recorded track.
• Press and hold for 2 seconds to delete all recorded tracks.

• Press repeatedly to select a sound effect (Drums / Keyboard / Piano / DJ / Customized).

• Press to enter color control mode to toggle between different light colors of your PartyBox front panel and wristband.

• Press once to play or pause the music.
• Press twice to play the next track.
• Press three times to play the previous track.

• Press to decrease or increase the volume level.
• Press both simultaneously to mute the audio output.

• Press repeatedly to switch between sound boost level 1 and level 2 or turn off.

• Press to turn the Smart DJ on or off.

Notes:

• Smart DJ analyze music rhythm and mix DJ effects with harmonize beats.
• Smart DJ fills the void of silence between two tracks and play music continuously with BT and USB sources.

• Rotate to adjust echo volume.

• Rotate to adjust the key level.

• Press to cancel or restore the human voice.

Notes:

• : Support only Bluetooth and USB.
• : Support all the sources (Bluetooth, USB, Aux, and RCA).
• : Work only when the Mic is plugged.

DJ pad

Color control

Press to enter color control mode, then press any DJ control key to select color for the light of both PartyBox and wristband nearby. The color will stay for 5 seconds. To keep the color constant, press and hold the DJ control keys.

1. Press and hold until the left strobe light turns on.
2. Press and hold until the right strobe light turns on.
3. Press and hold until the ring light turns off.
4. Press and hold until the panel light turns off.

Sound effects

Press repeatedly to select a sound effect (Drums / Piano / Keyboard / DJ / Customized).

Customized effects

Note:

• Support MP3 format only.

Recording

1. Press to start recording, when a control key is pressed, the white LED will light on. The harder you press the keys, the louder sound will play. After recording for 30 seconds, the recording will automatically stop, or press again to complete the recording.
2. Press to record a new track. The newly recorded track will overlap play in a loop with previously recorded tracks. Later recorded tracks will be shorter or equal to the first track.
3. Press to delete the last recorded track. To delete all recorded tracks, press and hold for 2 Power on seconds.

Back panel

Connections

Bluetooth

USB

AUX

LINE IN

Air Gesture Wristband

Power on / off

• Press to power on the Air Gesture Wristband, and it will be automatically paired with the PartyBox.
• Press to power off the Air Gesture Wristband.

Notes:

• For better performance make sure the wristband is worn firmly.
• When the Wristband is connected to the PartyBox the LEDs colors are sync to the PartyBox front panel.
• The Air Gesture Wristband will be connected automatically with the closest PartyBox 1000.
• The DJ wristband has the battery life of 10 hours. When the battery is low, the LED flashes red and the DJ wristband will power off five minutes later.
• Only one Wristband can connect to one PartyBox.

Control PartyBox by using Air Gesture Wristband

Gesture	Action
Clap ×2	Play sound effect 1
Shake ×4	Play sound effect 2
Rotate	Switch light patterns

Notes:

• Each time you power on the device, Sound effect 1 and 2 return to the defaults.
• For the sound settings users select on the DJ pad, the last chosen tones are synchronized to Sound effect 1 and the chosen tones just before the last ones are synchronized to Sound effect 2.

Mixing sound with microphone/ guitar (not provided)

TWS (true wireless stereo) mode

1. Press and hold on both speakers for 5 seconds, TWS connection will be built up.
2. Press L/R button on one speaker to toggle between L channel / R channel and Stereo, the other speaker will change the setting automatically.

Note:

• For best performance do not place any obstacles between the two speakers.

LED behavior

	Off	Power off
	White (Constant)	Power on
	Amber (Constant)	Standby
	Off	Not connected
	White (Constant)	Connected
	White (Flashing)	Pairing
	Off	Off
	White (Constant)	On
	Off	Off
	White (Constant)	On
	Off	Off
	White (Constant)	On
	Off	Off
	White (Constant)	On

Specifications