JBL SB300 Quick Start Quide
  1. Manuals
  2. Brands
  3. JBL Manuals
  4. Speakers
  5. Cinema SB300
  6. Quick start quide

JBL SB300 Quick Start Quide

Powered soundbar with powered subwoofer
Hide thumbs Also See for SB300:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

SB300
Powered soundbar with powered subwoofer
THANK YOU FOR CHOOSING THIS
®
JBL
PRODUCT
The SB300 is a two-piece home theater speaker system that
includes a powered stereo soundlbar speaker, a wireless 8-inch
(200mm), 100-watt powered subwoofer and all of the cables you
need to connect the soundbar to your TV and your cable/satellite
tuner or DVD player. Both components feature the dynamic new
JBL Weave design for a distinctive, one-of-a-kind look.
INCLUDED ITEMS
1X
On/Off
Aux
Digital
Input
Input
Stereo
Surround
Vol.+
Mute
Vol.–
1X
We're confident that this JBL system will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or
office, you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new speaker system. For more in-
depth information, go to our Web site: www.jbl.com.
2X
1X
1X
1X

Advertisement

Table of Contents
loading

Related Manuals for JBL SB300

Summary of Contents for JBL SB300

  • Page 1 PRODUCT We’re confident that this JBL system will provide every note The SB300 is a two-piece home theater speaker system that of enjoyment that you expect – and that when you think about includes a powered stereo soundlbar speaker, a wireless 8-inch...

  • Page 2: Soundbar Rear-Panel Controls And Connections

    Press the Mute button to Power mute the SB300 system. (The Power indicator flashes blue.) While Button On/Off the system is muted, press the Mute button again or the Volume Up button to restore the sound.

  • Page 3: Subwoofer Rear-Panel Controls

    SUBWOOFER REAR-PANEL CONTROLS Status Power Switch Level Control Cutoff Control Power Cord Connector Wireless Pairing Switch...

  • Page 4: Speaker Placement

    SPEAKER PLACEMENT If your TV is placed on a table, you can place the soundbar on the The performance of a subwoofer is directly related to its placement table directly in front of the TV stand, centered with the TV screen. in the listening room and its physical position relative to the other As long as the surface of the table is flat, the soundbar will rest on its speakers in the system.
  • Page 5 CONNECTIONS NOTE: If your DVD player, cable tuner or satellite tuner does not have an optical digital output, you can connect its analog audio output to Use the supplied stereo audio cable to connect the your TV. The TV will send its audio signal to the soundbar through the soundbar’s Source 1 (analog) input to your TV’s stereo audio output.

  • Page 6: Turning Soundbar/Subwoofer On/Off

    Set the soundbar’s Power switcn to the “On” position. After turning the soundbar and subwoofer on for the first time, you will need to “pair” the subwoofer and soundbar so they both operate at the same wireless frequency. To pair the units, press the Wireless Pairing switches on both units within 30 seconds.

  • Page 7: Subwoofer Level Knob

    Use the subwoofer’s Level knob to balance the bass with the rest of the sound. Play music or movies that you are familiar with, and adjust the subwoofer’s Level knob so the bass sounds balanced on both Frequency response: 42Hz – 20kHz (–3dB) music and films.
  • Page 8 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2011 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Table of Contents