Trunk Setting; Mirror Setting - TRENDnet TEG-160WS User Manual

Setting Tag VLAN on two switches. Switch 1's VLAN 1 (2 ~ 3 ports)
have access to the Switch 2's VLAN 1 (2 ~ 3 ports).
The settings of VLAN group for two devices are same.
Step1: Set Switch1's VLAN1 port 1and 4~15 to "Not Member", then apply setting.
Step2: Set Switch2's VLAN1 member as Switch1.
Step3: Uplink two switches via Port 16.
39

Trunk Setting

The Trunking function enables the cascading of two or more ports for
a combined larger bandwidth. Up to six Trunk groups may be created,
each supporting up to 8 ports. Add a Trunking Name and select the
ports to be trunked together, and click Apply to activate the selected
Trunking groups.
Trunk Configuration
Be sure that the selected trunk setting port must connect to the device
with a same VLAN group.

Mirror Setting

Port Mirroring is a method of monitoring network traffic that forwards
a copy of each incoming and/or outgoing packet from one port of the
Switch to another port where the packet can be studied. This enables
network managers to better monitor network performances.
40