Trunk Setting - TRENDnet TEG-424WS User Manual

Example 4:
Setting Tag VLAN on two switches. Switch 1's VLAN 1 (2 ~ 3 ports)
have access to the Switch 2's VLAN 1 (2 ~ 3 ports).
The settings of VLAN group for two devices are same.
Step1: Set Switch1's VLAN1 member port 1and 4~23, 25~28 to "Not Member", then
apply setting.
Step2: Set Switch2's VLAN1 member as Switch1.
Step3: Uplink two switches via Port 24.
39

Trunk Setting

The Trunking function enables the cascading of two or more ports for
a combined larger bandwidth. Up to six Trunk groups may be created,
each supporting up to 8 ports. Add a Trunking Name and select the
ports to be trunked together, and click Apply to activate the selected
Trunking groups.
Trunk Configuration
Be sure that the selected trunk setting port must connect to the device
with a same VLAN group.
40