Step2: Set VLAN1 port 1~16 to "Untag" ports, then apply setting.
Step3: Create VID 02 and set port 1~5 to "Untag" ports and port 6~16 to "Not
Member" ports, then apply setting.
35
Step 4: Create VID 03 and set port 1, 6~9 to "Untag" ports then apply settings.
Step 5: Set PVID port 2~9 value as below list
Note:
1. Untag port VLAN member can exist in different VLAN groups simultaneously when
Asymmetric VLAN function enabled.
2. You must create VLAN and add VLAN member first that just can set PVID setting.
3. You must change Untag Port PVID to another existent VLAN ID that just can
remove Untag port member from VLAN group
36