Device Setting; Toolbar - TRENDnet TPE-224WS User Manual

Device Setting

Configuration Setting: Under Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name, Location and DHCP function.
Select the device in the Discovery list or Monitor List and click
Configure Settings. The Configuration Setting window will appear (
Figure 10). After making the desired changes, enter the password
and click "Set". The default password is "admin".
Figure 9. Configuration Setting
Password Change: This option allows you to change the password,
Enter the original password, the new password, confirm the new
password and click "Set".
Figure 10. Password Change
Firmware Upgrade: Use this option to upgrade the firmware of the
Switch.
21
Figure 11. Firmware Upgrade
Web Configuration: Double click the device in the Monitor List or
select a device in the Monitor List and click "Access Web" to access
the Switch's browser configuration.
DHCP Refresh: Click "DHCP Refresh" to refresh the IP address of
selected device form DHCP server.

Toolbar

The toolbar in the utility has menu options; File, View, Options and
Help.
There are four options under "File"; Monitor Save, Monitor Save As,
Monitor Load and Exit.
Monitor Save: To record the setting of the Monitor List to the
default. The next time you open the utility, it will auto load
the default recorded setting.
Monitor Save As: To record the setting of the Monitor List
with a specific filename and file path.
22