Table of Contents
Advertisement
Viewing Images Copied to DVD on the TV
A
Connect.
A Disconnect the USB cable and turn off this burner.
B Connect the burner to the TV.
To view high definition images, connect using an optional HDMI cable or component video cable.
B
Play back.
A Turn on the burner.
Confirm that the power lamp is lighted in orange. If the lamp is not lighted in orange, disconnect the USB cable then turn
off and on the power again.
B Press the open/close (M) button to eject the tray.
C Insert a finalised disc.
D Press the open/close (M) button to close the tray.
The following screen appears.
E Play back.
For details on playback, refer to page 15 of this instruction manual.
Before erasing data from GZ-HD7
..................................................................................................................................................................
Confirm that the data has been copied to DVD before erasing.
Audio/Video cable
(provided)
Approx. 20 seconds later
PLAY VIDEO
PLAY IMAGE
EN
CS
3
Advertisement
Chapters
Table of Contents
