Removing And Installing The Cowling - Yamaha MT01X Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing the
cowling
1. Cowling
The cowling shown above needs to be
removed to perform some of the main-
6
tenance jobs described in this chapter.
Refer to this section each time the
cowling needs to be removed and in-
stalled.
Cowling
To remove the cowling
Remove the bolts, and then pull the
cowling off as shown.
EAU18760
1. Cowling
2. Bolt
EAU36831
1. Cowling
2. Bolt
To install the cowling
Place the cowling in the original posi-
tion, and then install the bolts.
1. Cowling
2. Projection
3. Grommet
NOTE:
Make sure that the grommet fits over
the projection.
6-6