Multi-Function Display - Yamaha MT01X Owner's Manual

When the key is turned to "OFF" and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
This model is also equipped with a self-
diagnosis device for the immobilizer
system. (See page 3-7 for an explana-
tion of the self-diagnosis device.)
INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

1. Clock
2. "RESET" button
3. Tachometer
4. "SELECT" button
5. Speedometer
6. Odometer/tripmeter/fuel reserve tripmeter
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit.
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G a tachometer (which shows engine
speed)
3-5
G
EAU36943 an odometer (which shows the to-
tal distance traveled)
G two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a clock
G a self-diagnosis device
G
a brightness control mode
NOTE:
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons except for setting the brightness
control mode.
EWA12421
3