Handlebar Switches - Yamaha MT01X Owner's Manual

Handlebar switches

Left
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
5. Hazard switch " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU12347 Right
1. Engine stop switch "
2. Start switch " "
Pass switch "
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
/ "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
EAU12350
or when the throttle cable is stuck.
"
Start switch "
EAU12400
Push this switch to crank the engine
/ "
with the starter.
" for the high
CAUTION:
See page 5-1 for starting instruc-
EAU12460
/ "
tions prior to starting the engine.
". When re-
The engine trouble warning light will
come on when the key is turned to "ON"
and the start switch is pushed, but this
does not indicate a malfunction.
3-9
EAU12500
"
EAU12660
3
/ "
" before starting
" to
EAU12710
"
ECA10050
EAU41700