Makita JS1600 Instruction Manual page 3

replaced by an authorized service center unless otherwise indicated elsewhere in this
instruction manual. Have defective switches replaced by authorized service center.
Don't use
tool
if
switch does
not turn
it
on
and
off.
19. G U A R D AGAINST ELECTRIC SHOCK. Prevent
body
contact with
grounded sur-
faces. For example; pipes, radiators, ranges, refrigerator enclosures.
20. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the t o o l t o a power source (receptacle, outlet, etc.) be sure
the voltage supplied is the same as that specified o n the nameplate o f the tool. A power source with
voltage greater than that specified f o r the t o o l can result in SERIOUS INJURY t o the user
-
as well as
damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h voltage
less than the nameplate rating is harmful t o the motor.
Shear & Standard Equipment
Tool
body
I
I _
1
Switch lever (Paddle switch1
Yoke