Replacing The Drive Door - Dell Precision Workstation 470 User Manual

Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
1 top bracket hinge
2 bottom bracket hinge
3. Lift the bottom bracket hinge away from the computer.

Replacing the Drive Door

To prevent damage to your computer, the drive door is designed to "break away" from the computer if it is opened too far. If
the drive door detaches from the computer without disassembling, perform the removal procedure in reverse.
If the drive door is open and it is opened too far, instead of breaking away from the computer in one piece, the drive door
may disassemble into several smaller pieces. If the drive door disassembles:
1. If necessary, reattach the door hinges to the door bracket. Ensure that the hinge tabs are away from the door bracket.
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]