Disabling A Forgotten Password And Setting A New Password; Entering System Setup - Dell Precision Workstation 470 User Manual

Advanced Features: Dell Precision Workstation 470 and 670 Computers User's Guide
A change to Admin Password becomes effective immediately (you do not need to restart the computer).
Operating Your Computer With an Admin Password Enabled
When you enter system
in the Security group and enter the admin password.
NOTE: You can use Password Status in conjunction with Admin Password to protect the system password from
unauthorized changes.
Changing or Deleting an Existing Admin Password
To change the admin password:
1. Enter system setup.
2. Highlight Admin Password and press <Enter>.
3. Enter your old password and enter the new password at the New Password and Confirm New Password prompts.
To delete the admin password:
1. Enter system setup.
2. Highlight Admin Password and press <Enter>.
3. Enter your old password and enter a blank password at the New Password and Confirm New Password prompts.
The setting changes to Not Set.

Disabling a Forgotten Password and Setting a New Password

To reset system and/or admin passwords, see
System Setup
Overview
Use system setup as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
To set or change a user-selectable option such as the user password
To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen information for future
reference.

Entering System Setup

1. Turn on (or restart) your computer.
file:///T|/htdocs/systems/ws670/EN/ug_en/advfeat.htm[3/20/2013 9:31:46 AM]
setup, you can view, but not notify, system setup options. To modify options, go into Unlock Setup
"Clearing Forgotten Passwords."