Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
1 release lever
2 processor
3 processor socket
4 processor pin-1 indicator
5 socket pin-1 indicator
7. Remove the thermal grease protective cover and place the heat sink in the base.
8. Install the heat sink:
a. Slide one end of the heat sink under the retention tab.
b. Pull out the other retention tab and lower the heat sink until it fits securely in the base.
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]