Advertisement
time period of Internet non-use exceeds the Idle Time setting.
• "Manual": Connects the router to the ISP only when you click
"Connect" on the Web user interface. The WAN connection will not
disconnect due to the idle timeout, and if the WAN connection is
disrupted and re-linked, the router will not auto-connect to the ISP.
Idle Time — You can specify an idle-time threshold (in minutes) for the
WAN port. If no packets have been sent (no one has been using the
Internet) throughout this specified period, the router will automatically
disconnect from your ISP.
Click "OK" to finish the PPPoE configuration; then you can start using
the router.
PPTP
Select if your Internet service provider requires the PPTP protocol to
connect you to the Internet. Your ISP should provide all the information
required in this section.
Obtain an IP address automatically — When this is selected, you obtain
an IP address via the DHCP before connecting to the PPTP server.
10
Enter the Username and Password required by your ISP in the appropriate fields.
If your ISP has provided you with a Service Name, enter it in that field; otherwise,
leave the field blank.
Advertisement
