Step 3: Connecting The Power Cord; Step 4: Quick Setup - Sony DVP-NSSOOV Operating Instructions Manual

Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver), the menu setting for the
player such as Playback Memory may be lost.
5
g
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press w. To return to the previous adjustment, press H.
ENTER
I I
- +I*
- ENTER
q
Turn on the TV.
q
Switch the input selector on the TV to the player.
q
Press POWER on the player and press I/& on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message
does not appear, select "QUICK" under "SETUP" in the Control Menu to run Quick Setup
(page 72).
con timed -
27