Sony DVP-NSSOOV Operating Instructions Manual page 82

l
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
l
Do not place the rear speakers farther away from
your listening position than the front speakers.
. These settings do not affect the SACD Multi audio
signals.
W BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set "TEST
TONE" to "ON" for easy adjustment.
The default adjustments are in parentheses.
FRONT Adjust the balance between the
WW
front left and right speakers (-
6dB [L] to +6dB [R], OSdB
increments).
REAR (OdB)
Adjust the balance between the
rear left and right speakers (-
6dB [L] to +6dB [RI, 0.5dB
increments).
n LEVEL
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to
"ON" for easy adjustment.
The default adjustments are in parentheses.
FRONT (OdB)
Adjust the level of the front
speakers (-6dB to OdB, 0.5 dB
increments).
CENTER
Adjust the level of the center
WB)
speaker (-12dB to OdB, 0.5dB
increments).
REAR (OdB)
Adjust the level of the rear
speakers (-12dB to OdB,
0.5dB increments).
SUBWOOFER
Adjust the level of the
(OdW
subwoofer (-1OdB to +IOdB,
0.5dB increments).
To adjust the volume of all the
speakers at one time
Use the amplifier's (receiver's) volume control.
HTEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the "BALANCE" and "LEVEL."
pJ
The test tone is not emitted from
the speakers.
ON
The
test tone is emitted from each
speaker in sequence while
adjusting balance or level.
When you select one of the
"SPEAKER
SETUP"
items, the
test tone is emitted from both left
and right speakers simultaneously.
1
Select "SPEAKER SETUP" in the Setup
Display.
2 Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3 From your listening position, select
"BALANCE" or "LEVEL" and adjust the
value of "BALANCE" using C/+ and
"LEVEL" using +/+.
The test tone is emitted from both left and
right speakers simultaneously.
4 Select "TESTTONE" and set to "OFF" to
turn off the test tone.
l
When you adjust the speaker settings, the sound cuts
off for a
moment.
l
The test tone signals are not output from the digital
jack.
82