Table of Contents
Advertisement
For connection details, see page 20.
Select "DOLBY DIGITAL," "DTS,"
and
"48kHz/96kHz
PCM" after setting "DIGITAL
OUT" to "ON."
WDOLBY DIGITAL (DVD VIDEOIDVD-
RW only)
Selects the Dolby Digital signals to be output
via the DIGITAL OUT (OPTICAL or
COAXIAL)
jack.
D-PCM
DOLBY
DIGITAL
Select this when the player is
connected to an audio component
lacking a built-in Dolby Digital
decoder. You can select whether
the signals conform to Dolby
Surround (Pro Logic) or not by
making adjustments to the
"DOWNMIX"
item in "AUDIO
SETUP" (page 77).
Select this when the player is
connected to an audio
component with a built-in Dolby
Digital decoder.
If the player is connected to an
audio component lacking a built-
in Dolby Digital decoder, do not
set this. Otherwise, when you
play the Dolby Digital sound
track, a loud noise (or no sound)
will come out from the speakers,
affecting your ears or causing the
speakers to be damaged.
n
DTS (DVD VIDEO only)
Selects the DTS signals to be output via the
DIGITAL OUT (OPTICAL or COAXIAL)
jack.
wcn
DTS
Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder. If you play DTS
audio sound tracks, the player
outputs stereo signals via the
DIGITAL OUT (OPTICAL or
COAXIAL) jacks.
Select this when the player is
connected to an audio
component having a built-in
DTS decoder. If the player is
connected to an audio
component lacking a built-in
DTS decoder, do not set this.
Otherwise, when you play the
DTS sound track, a loud noise
(or no sound) will come out from
the speakers, affecting your ears
or causing the speakers to be
damaged.
n
48kHz/96kHz
PCM (DVD VIDEO
only)
Selects the sampling frequency of the audio
signal to be output via the DIGITAL
OUT
(OPTICAL or COAXIAL) jack.
48kHz/lGbit
The audio signals of DVD
VIDEOS are always converted to
48kHzB6bit.
96kHz/24bit
All types of signals including
L
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for copyright
protection purposes, the signal is
only output as 48kHz/16bit.
If a receiver (amplifier) which
cannot accept 96kHz is
connected to the player, do not
set this. Otherwise, a loud noise
may come out from the speakers.
l
Even if you set "48kHz/96kHz PCM" in "AUDIO
SETUP" to "96kHz/24bit," the sampling frequency
is converted to 48kHz/16bit when a "SURROUND"
mode (page 55) is selected.
l
The analog audio signals from the LINE OUT L/R
(AUDIO) l/2 jacks are not affected by this setting
and keep their original sampling frequency level.
79
Advertisement
Table of Contents
