Sony DVP-NSSOOV Operating Instructions Manual page 25

This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital or DTS decoder, refer to page 22.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
ol
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The
E
surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer)
$
are used.
If your amplifier (receiver) has L and R audio input jacks only, use m. If your amplifier
(receiver) has a digital input jack, use a.
WRecommended surround sound effects using this connection with your
amplifier (receiver)
l
Dolby Surround (Pro Logic) (page 86)
.S".
c For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver)
SACD audio signals are not output from the digital jack
continued -
25