Gateway EC54 Service Manual page 125

www.gateway.com
4
If desired, you can opt to enable the Password on boot parameter.
5
When you are done, press u to save the changes and exit the BIOS Setup
Utility.
Removing a Password
Follow these steps:
1
Use the w and y keys to highlight the Set Supervisor Password parameter
and press the e key. The Set Password box appears:
2
Type the current password in the Enter Current Password field and press
e.
3
Press e twice without typing anything in the Enter New Password and
Confirm New Password fields. The computer then sets the Supervisor
Password parameter to "Clear".
4
When you have changed the settings, press u to save the changes and
exit the BIOS Setup Utility.
Changing a Password
Follow these steps:
1
Use the w and y keys to highlight the Set Supervisor Password parameter
and press the e key. The Set Password box appears:
2
Type the current password in the Enter Current Password field and press
e.
3
Type a password in the Enter New Password field. Retype the password
in the Confirm New Password field.
4
Press e. After seeing the password, the computer sets the User Password
parameter to "Set".
5
If desired, you can enable the Password on boot parameter.
6
When you are done, press u to save the changes and exit the BIOS Setup
Utility.
lxxx