Chapter 4. Configuring The 1330 In 3270 Mode; Configuration Procedure; Using The Keys; Getting Into The Menu Mode - MTX 1330-X02 Operator's Manual

Chapter 4. Configuring the 1330 in
The configuration process enables you to customize the 1330 to meet your specific
operating needs without assistance from Customer Service. You can also change
configuration parameters at any time without service costs.
The 1330 Operator Control Panel provides access to the configuration options. Now that
you are familiar with the operator control panel, you are ready to configure the printer.
Review the following summary of the configuration process before you begin.

Configuration Procedure

Using the Keys

Here are some general rules for keypad use in Menu mode:
• Press the Option key while in Stop mode to enter Menu mode.
• Press the Up Arrow key to scroll forward in the menu list.
• Press the Down Arrow key to scroll backward in the menu list.
• Press the Right Arrow to scroll forward in the options list under the current menu and
to scroll forward in the value list under the currently selected option.
• Press the Left Arrow to scroll backward in the options list under the current menu and
to scroll backward in the value list under the currently selected option.
• Press the Start key to select the current option.
• Press the Stop key to exit from a selected option or Menu mode.
• Press the Save key to activate a choice for the currently selected option.

Getting into the Menu Mode

You must get into the Menu mode when you want to configure the 1330. The procedure
for getting into the Menu mode is as follows:
1. Press the Stop key when the printer is in Ready mode.
2. Press the Option key to put the printer into the Menu mode. (If you do not have the
optional dual interface board installed in your printer, go to Step 4.)
701333-004
3270 Mode
4-1