Figure 2-3. Shifting Ribbon Cartridge; Figure 2-4. Platen Gap Lever - MTX 1330-X02 Operator's Manual

Ribbon Drive
Gear Knob
Mounting Clip
Platen Gap Lever
5. If you are replacing the ribbon cartridge, grasp both sides of the ribbon shifter guide,
as illustrated in Figure 2-5, and gently bend the sides toward the rear of the printer.
The ribbon shifter guide will disengage. Lift it away from the printer.
701333-004
Mounting Clip

Figure 2-3. Shifting Ribbon Cartridge

Ribbon Shifter Button

Figure 2-4. Platen Gap Lever

Preparing to Operate the 1330
Removable Corner Guides
Ribbon Shifter Guide
Ribbon Stop (REMOVE
AFTER INSTALLATION)
Ribbon Shifter Button
2-5