Chapter 3. Operator Control Panel
The 1330 Operator Control Panel, located on the front of the printer, consists of the
status display window and the keypad. The status display monitors printer operations,
and the keypad is used to start and control operator functions. See Figure 3-1.
The Status Display
The 80-character status display window, located on the left side of the operator control
panel, indicates the operating mode, the printing formats, and other conditions on the
1330. Several of these messages are explained below. (See Figure 3-2 for status display
layout.) Messages that appear during print format operations and configuration are
discussed in Chapters 4 and 5.
CU
EMULATION
MODE
701333-004
Start
Stop
Figure 3-1. 1330 Operator Control Panel
OPERATING MODE
S/C/A
Figure 3-2. Status Display
Load/
Eject
Form Feed
Line Space
FORM DEVICE
Top of
Contrast
Form
Option
Setup
Cancel
Save
Print
DATASTREAM
MODE
RESERVED LINE
STATUS MESSAGE
LINE
3-1