Figure 7-7. Decrease Print Registration Value - MTX 1330-X02 Operator's Manual

Maintaining the 1330
10. To verify your change, press Save and exit Menu mode. The printer will reinitialize.
Go back to Step 3 of this procedure until print registration is acceptable in the center
portion of the printout.
Note: If you cannot obtain an acceptable print registration sample, or if the center
portion of the printout is acceptable, but the column of Hs to the right and left is
not properly registered, call Customer Service.
11. To return the printer to normal operation, press the Start key.
7-8
> H H H H
H H H H
> H H H H
H H H H
> H H H H
H H H H

Figure 7-7. Decrease Print Registration Value

701333-004