Checking Character Width And Print Registration; Figure 7-4. Carriage - Side View; Figure 7-5. Proper Print Registration - MTX 1330-X02 Operator's Manual

Table of Contents

Failure to enter the correct print head style under Configuration Option 404 can result in

poor print head performance and can damage the print head.

22. Press the Save key and the Stop key. If you plan to print in data processing quality,

enter 1. If you want to print in data processing text quality, enter 2. If you want to

print in near letter quality, enter 3. Press Save.

23. You can resume printing by pressing Stop until STOP is displayed, then Start.

Print Head Connector -

Long

Key Location

Ribbon Shifter Connector

Checking Character Width and Print Registration

After changing the print head, you may want to check the printed character width and

print registration. Print registration refers to the proper vertical alignment of characters

from line to line at the right and left margins of the printed text. When the print registration

is correct, characters are properly aligned at the margins, as shown in Figure 7-5.

H H H H H H H H H H H H H H H H H H H H H H H H H

701333-004

Caution

Maintaining the 1330

Hook

7-5

Table of Contents