SANTOS: Instruction and Maintenance Manual
MAINTENANCE
Before any servicing of the appliance, it is essential to unplug the appliance from the
mains supply (7).
This machine requires no particular maintenance because the bearings are lubricated for
life.
If servicing is necessary to replace any parts such as the electrical components or any
others, refer to the list of components (see the exploded view at the end of the manual).
Spare parts
To order any spare parts, specify the type of machine, its serial number and the electrical
characteristics noted beneath the appliance..
IMPROPER USE
1. Do not use this appliance to press any food other than limes, lemons,
oranges and grapefruit.
TROUBLESHOOTING
Identifying the cause of appliance stoppage precisely.
The appliance does not start:
• Check: the mains supply, the condition of the power cord (7).
The appliance stops due to motor overheating: (the motor unit is hot)
The motor is protected by a built-in thermal cutout. In the event of overheating, the motor
stops.
• Set the On / Off switch (6) to 0 position, disconnect the plug (7).
• Wait until the motor cools down (20 to 45 minutes), reconnect the plug (7) then press
the On / Off switch (6) (position 1).
If the problem persists, switch off the power supply to the appliance (unplug the cord from
the mains socket (7)) and call in the maintenance service or contact a SANTOS-approved
dealer.
The appliance stops further to an overload:
If the motor stalls (due to excessive pressing), it can heat very quickly and stops by
overload protection.
11-38-52 US 2.0 - 02 2004
Page 4 / 9