Page 1
FAX 33 (0) 478 26 58 21 SANTOS: Instruction and Maintenance Manual E-Mail :santos@santos.fr www.santos.fr CITRUS JUICER WITH LEVER # 10 CITRUS JUICER WITH LEVER # 70 USER AND MAINTENANCE MANUAL IMPORTANT: documents included in this manual to be kept: •...
SANTOS: Instruction and Maintenance Manual CONTENTS “CE” COMPLIANCE DECLARATION ........................3 IMPORTANT SAFEGUARDS ............................4 IMPROPER USE ................................4 ELECTRICAL CONNECTION: ........................... 4 PREPARING THE APPLIANCE FOR USE FOR THE 1 TIME (F . A )..............5 RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE ..............5 DESCRIPTION OF THE APPLIANCE ........................
SANTOS: Instruction and Maintenance Manual “CE” COMPLIANCE DECLARATION THE MANUFACTURER: SANTOS - 140-150, Av. Roger SALENGRO 69120 VAULX-EN-VELIN (LYON) FRANCE declares that the appliance intended for the professional market described below: Description: CITRUS JUICER WITH LEVER Type number: 10, 10C, 70, 70C complies with: •...
9. It is forbidden to operate the appliance on a surface with a slope in excess of 10° with respect to the horizontal plane. The feet of the machine must always be resting on this surface. The machine motor centre line must always be vertical with respect to the surface on which it is placed.
– Professional Equipment section – so that it can be either recycled or disassembled in order to reduce any impact on the environment. For further information, please contact your dealer or SANTOS.. For the disposal or recycling of the appliance components, please refer to a specialist company or contact SANTOS.
(1), o mechanical clutch. • Citrus Juicer n°10 is designed for extracting juice from oranges and lemons. • Citrus Fruit Squeezer n°70 is designed for extracting juice from oranges, lemons and grapefruit.
5. Remove the glass-holder (8), the grid (10) and rinse under running water. 6. Model n°10: When more thorough cleaning is required, the pressing cup (3) must be removed. To do this, unscrew it by turning it anti-clockwise (Fig. B and Fig. C).
• Wait for the motor to cool down (25 to 45 minutes) then press the On / Off switch (6) ("1-On" position). If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket) and call in the maintenance service or contact a SANTOS approved dealer. The appliance stops following an overload: •...
SANTOS: Instruction and Maintenance Manual REFERENCE TO STANDARDS • CE (Europe) • GS (Germany) checked by the LNE National Test Laboratory. 5min / 5min cycle: The professional appliance is designed for continuous use according to an intermittent cycle of 5 minutes on, 5 minutes off. This cycle corresponds to the...
SANTOS: Instruction and Maintenance Manual Wiring diagram Black Yellow Grey White Capacitor On / Off Blue White White Brown Green Yellow 98110 EN 4.2 - 03 2013 10 / 13 www.santos.fr...
SANTOS: Instruction and Maintenance Manual Figures Fig. A Fig. D Fig. B’ MARK Description MARK Description Pressure lever On / Off switch Cone Motor unit Pressing cup Glass holder Splash guard Juice container Glass support grid 98110 EN 4.2 - 03 2013 11 / 13 www.santos.fr...
Page 12
SANTOS: Instruction and Maintenance Manual Unscrewing Fig. B Fig. C Fig. E 98110 EN 4.2 - 03 2013 12 / 13 www.santos.fr...
In case of revelation of an imperfection during the warranty period, the Distributor has to, unless a different written agreement of SANTOS, indicate to his customer to stop any use of the defective product. Such a use would release SANTOS of any responsibility.
Need help?
Do you have a question about the 10 and is the answer not in the manual?
Questions and answers