Your Citrus Juicer Nos. 11- 38 - 52; Electrical Connection - Santos 11 Instruction And Maintenance Manual

SANTOS: Instruction and Maintenance Manual

YOUR CITRUS JUICER Nos. 11- 38 - 52

• Citrus juicers nos. 11 – 38 – 52 are especially designed for bars, cafés, hotels,
restaurants, cocktail bars, institutions, fresh fruit juice bars, etc.
• The appliances nos. 11 and 38 are comprised of an aluminum motor unit, a juice
bowl and 3 engineered plastic pressing cones (2 pressing cones for model N°38).
• The appliance no. 52 is comprised of an aluminum motor unit, a powerful motor for
intensive use, a stainless steel bowl, 3 plastic pressing cones and a plastic anti-
splash dome.
• Citrus juicers nos. 11 – 38 – 52 are designed to press limes, lemons, oranges or
grapefruit.
• They are ideal for preparing: fresh lemon, orange or grapefruit juice or as a basis for
preparing fruit cocktails.

ELECTRICAL CONNECTION;

• The appliance's power supply is available in two single-phase voltages:
100-120 V, 50/60 Hz
-
220-240 V, 50/60 Hz
-
Line protection: the appliance must be connected to a standard socket 2 poles + ground.
The installation must be fitted with a differential circuit breaker and a 16 amp fuse.
CARE:
• Before plugging the appliance in, make sure that its operating voltage, to be found on
the warranty sheet supplied with the machine, and on the rating plate underneath the
machine, matches your power supply.
• If the power cable is damaged, it should be replaced with a special unit available
from SANTOS or a SANTOS-approved dealer.
CARE: Make sure that the on / off switch (6) is on 0 position before plugging the power
cord (7) into the mains supply socket (Fig.A).
Note: You will find it easier to understand the next few paragraphs if you refer to
the diagrams at the end of this manual.
11-38-52 US 2.0 - 02 2004
Page 2 / 9