Quick View Of System Functions - First Alert
ReadyGuard-REN
User Manual

48,&.9,(:2)6<67(0)81&7,216
NOTE:
SECURITY FUNCTIONS
Checking system status: ----------------------
To arm in STAY mode: ---------------------
To restart exit delay: -------------------------
To arm in AWAY mode: --------------------
To arm with NO DELAY: ------------------
To arm if Quick Arm is active: -------------
To disarm system and silence alarms: -----
To bypass a zone(s): --------------------------
To turn Chime mode on or off: -------------
* Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or AWAY key.
MESSAGE CENTER
To record a message: -------------------------
To stop recording before end of 20 secs: -
To play back a message: ---------------------
VOLUME ADJUSTMENT
To adjust message playback/announcement volume: -
To mute system announcements: -----------
To restore/unmute announcements: -------
SPEAKER PHONE OPERATION
To enter speaker phone mode: --------------
To exit speaker phone mode: ---------------
To enable/disable (toggle) ringer: ----------
To return the keypad to telephone mode (after clearing an alarm or trouble or after disarming the system):
[#] + AUX
To flash (switch between two calls using call waiting):
*To return to first call wait at least two (2) seconds and enter
= Boxes represent the entering of your 4-digit user code.
STATUS
STAY (only if programmed and system armed in Stay mode)
AWAY or STAY (hold down for at least 2 seconds)
FUNCTION + CHIME
FUNCTION + RECORD
OFF
FUNCTION + PLAY
FUNCTION + VOLUME + OFF
FUNCTION + VOLUME + [3] or [6]
[#] + AUX
OFF
[#] + VOLUME
AUX
AUX
– 7 –
* + STAY
* + AWAY
* + AWAY or STAY + NO DELAY
+ OFF
+ BYPASS + 2-digit zone number(s)
FUNCTION + VOLUME + [3] or [6]
+ AUX
*
.
again