Quick View Of System Functions - First Alert ReadyGuard Plus User Manual

QUICK VIEW OF SYSTEM FUNCTIONS

QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
NOTE:
SECURITY FUNCTIONS
Checking system status: ---------------------
To arm in STAY mode: ----------------------
To restart exit delay: -------------------------
To arm in AWAY mode: ---------------------
To arm with NO DELAY: -------------------
To arm if Quick Arm is active: -----------
To disarm system and silence alarms:
To bypass a zone(s): ---------------------------
To turn Chime mode on or off: -----------
* Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or AWAY key.
MESSAGE CENTER
To record a message: -------------------------
To stop recording before end of 85 secs:
To play back a message: ---------------------
----------------------------------- [✻]
To skip a message:
To delete all messages:
VOLUME ADJUSTMENT
To adjust message playback/announcement volume:
To mute system announcements: -------
To restore/unmute announcements:----
SPEAKER PHONE OPERATION
To enter speaker phone mode: -----------
To exit speaker phone mode: -------------
To enable/disable (toggle) ringer: ------
To return keypad to telephone mode
To flash (switch back and forth between two calls using call waiting):
(
wait at least two (2) seconds before pressing AUX again)
= Boxes represent the entering of your 4-digit user code.
STATUS
AWAY or STAY (hold down for at least 2 seconds)
FUNCTION + CHIME
FUNCTION + RECORD
OFF
FUNCTION + PLAY
--------------------------- FUNCTION + DELETE (during message replay)
FUNCTION + VOLUME + OFF
FUNCTION + VOLUME + [3] or [6]
[#] + AUX
OFF
[#] + VOLUME + AUX
(after clearing an alarm or trouble or disarming the system):
* + STAY
* + STAY OR STAY
* + AWAY
* + AWAY or STAY + NO DELAY
+ OFF
+ BYPASS + 2-digit zone number(s)
FUNCTION + VOLUME + [3] or [6]
AUX
– 9 –
(only if programmed
and system is armed
in Stay mode.)
[#] + AUX