Aux Function - First Alert
ReadyGuard-REN
User Manual

General Information
The key may have been programmed to either perform a predefined function or to send a preset
AUX
message to a pager (see PAGER FEATURE section for pager operation). Ask your installer which function
has been assigned for your system.
Key: PRE-DEFINED FUNCTION
AUX
If programmed for the AUX function, you can use the
that have been stored in the system's memory. Typical functions include:
• Seldom used but repeatable sequences
• Arming sequences that involve bypassing zones before arming
• Device activation sequences
Defining the AUX Function
The system must be disarmed before defining a function.
1. Enter
Master user code
2. Press the desired command sequence, up to 20 keystrokes. Press the
in the sequence.
3. Press the key twice to end the definition.
AUX
For example, to bypass Zones 10 and 11 and arm AWAY with NO DELAY, enter the following string:
+
FUNCTION
Master user code
Note that the key is included in the 20 keystroke maximum.
AUX
Performing the AUX function
Press and hold down the
The defined function will begin.
Your user code
+ +
FUNCTION AUX
+ [ 6] + [10] + [11] +
AUX +
(hold down at least 2 seconds until 4 beeps sound), then enter
AUX key
86(5)81&7,216
PAGING FUNCTION
key to activate a string of up to 20 keystrokes
AUX
(hold down at least 2 seconds until 4 beeps sound).
AUX
AUX + AWAY +
– 23 –

AUX FUNCTION

key between each command
[0] +
AUX + AUX