Advertisement
RECORDING
COMPACT
DISCS
Computer
recording
Whh computer recording,
you
can record a CD onto a cassette by pressing
just one button.
-t.
2.
3.
4.
5.
6.
7.
Load the disc(s) to be recorded.
Load a blank cassette
into deck B.
Select "CLY function.
For programmed
recording
from up to 3 discs, programme
the
material in advance (as desm-bed under''PROGRAMMED
PLAY').
Press the disc select button (DISC 1, DISC 2 or DISC 3) to select the
disc to be recorded first, then press the
STOP button.
For programmed
recording,
this step is unnecessary.
Press the HIGH or NORMAL
CUfvtPUTER
REC button.
HIGH: For high speed recording.
'HI SPEED" appears on the display.
NORMAL:
For normal speed recording.
"Hl SPEED" disappears.
The system automatically
performs
the following functions:
Deck B:
-
The tape rewinds to the beginning.
Recording starts.
CD playe~
The player searches for the first track to be recorded, then enters
the pause mode.
-
CD play starts.
Manual edit recording
Recording
starts without rewinding
the tape initially.
Press the EDIT button to turn the "MANUAL"
indication
on
before proceeding
to step 5.
To cancel this mode, press the button again. "MANUAL"
disappears.
After loading the cassette,
the tape must be wound to the
point where you would like to starl recording.
" D PL4Y,
"COMPU.
REC", " P",
("HI SPEED") and "REC" appear
on the display as recording
begins.
;CL
HI
SFEm
e
-'a
nn
I
I
U.u
I
c
After deck B stops automatically,
turn over the cassette and reinsert
it.
If the tape ends while a track is still playing, the CD player enters
the pause mode at the beginning
of the track that was playing.
This track will be recorded
at the beginning of side B.
Press the button that was pressed in step 5. Recording of side B starts
automatically.
Note:
Recording
starts automatically
after4 seconds for high speed recording
or 8 seconds
for normal speed recording,
so the recording will not be
it%ernapted
by the leader tape at the beginning
of sides A and B.
-
A 5-second
blank space is automatically
recorded at the end of each
track-
TO stop computer
recording
at any time, press the
STOP button on
rhe CX3 player or the
button on the deck. The CD player and deck B
*II
s-lop.
-
Where CD computer
recording
is used, repeat play mode is cancelled
atosmatically.
-
When high speed CD computer recording is used, Dolby NR recording
rmocfe is cancelled
automatically.
IMrhg
high speed recording,
normal monitoring
is not possible.
Manual
recording
1.
2.
3.
4.
Follow
the steps 1--3 under "Computer
recording" above.
K required,
press the disc select button (DISC 1, DISC 2 or DISC
3) to select the disc, then press the
STOP button. Select the
track number to be recorded.
press the REC PAUSE button. Deck B enters the record pause mode.
V3E6"
appears
and"
" blinks on the display.
Press the
button.">"
remains
lit and recording starts.
To stop recording,
press the E button on the deck.
When the end of the tape is reached, the CD player and deck B stop
atrtomat ically.
RECORDING
FROM THE TUNER OR VIDEO/
PtiONO
INPUT
1.
2.
3.
4.
5.
6.
Load a blank cassette into deck B.
Tune
in the radio station
to be recorded,
or play a record, video
cassette
or video disc.
Press the REC PAUSE button. Deck B enters the record pause mode.
Press the
button. Recording
starts.
Preasthe
REC PAUSE button to temporarily
stop recording. Press the
*
button again to continue.
Press the 9 button to stop recording.
When beat interference
is heard
A high-pitched
noise called "beat"issometimes
heard during the recording
of radio broadcasts.
If this occurs,
1.
Press the MEMORY
button.
2.
While "PROG." is blinking, press the
>/
W SKI PLSEARCH button
to select "be-l" or "be-2". Select the setting that gives the best results.
When the end of the tape (side B) is reached, the CD player and deck
B stop automatically.
If the last track on the CD plays completely
before the end of the
tape, disc play stops automatically.
Deck B also stops.
14
..
Advertisement
