Advertisement
To start play
fmm the
desired
track
Using the remote
control -
1.
Select the desired
disc by pressing
the DISC SELECT
button, then
press the
button.
2.
Press two number buttons
to select the desired track.
Using the main unit
1.
Press the desired DISC button,
then press the E STOP button.
2.
Select the desired track by using the SKIPLSEARCH
buttons, then
press the
/11 PLAY/PAUSE
button.
Temporarily
stopping
play
Press the
/11 PLAY/PAUSE
button. " D PLAY" blinks on the display. TO
resume play, press the button again.
Skip play
To skip to track 6 while track 3 is playing,
press the
>/ EM
SKIP/
SEARCH button repeatedly
until "6" appears in TRACK on the display.
To skip back to track 3 while track 6 is playing, press the K</<<
SKIP/
SEARCH button repeatedly
until "V appears.
-
The number b~ons
on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press O, then 6.
Search (forward/reverse)
[f the
E/ EM or14+/++
SKIP/SEARCH
button is pressed during play,
the player will search at high speed
in the forward or reverse direction
while the button is being pressed.
When the button is released,
normal
play will continue.
Random play
Press the RANDOM button on the remote control to begin random play.
The player will automatically
select and play discs and tracks at random.
"RANDOfW
appears on the display.
Random play will not function
during programmed
play.
Repeat play
Press the REPEAT button repeatedly
to select the desired repeat mode
in the following
sequence.
The selected
repeat mode is shown on the
display.
REPEAT ONE
Repeat one track.
REPEAT ALL Repeat all tracks on the selected disc.
REPEAT CONT
Repeat all tracks on all discs.
Released:
Normal play mode
Note:
During programmed
play, "REPEAT
CONT" can not be selected.
Disc check
Press the DISC CHECK button to play the first 10 seconds of the first track
of each disc. "D PL4Y" and "dlSC CH" appear and the disc number blinks
on the display.
Press the
STOP button to stop disc check.
Disc check will not function during random play or programmed
play.
PROGRAMMED
PLAY
Up to 32 selections, from up to 3 discs, can be programmed
for play in any
order.
-
To begin the programming
procedure,
select "CD" function first.
The discs or tracks must be programmed
in the stop mode.
The same disc or track can be programmed
more than once.
Follow the example below to programme
tracks 6 and 2 on DISC 1 and all
tracks on DISC 3. In this example,
each disc has 9 tracks and DISC 3 is
in playing position.
1.
Press the MEMORY
button.
~
m
2
3
4.
5.
6.
7.
8.
9.
Select
disc
1 by pressing the DISC 1 button.
-
The DISC SELECT button on the remote control can also be used.
i
Select track 6 by pressing
the
>/>@-l
SKIP/SEARCH
button.
The number buttons on the remote control can
also be used.
Press lhe MEMORY
button.''PROG."
remains lit.
Select Irack 2 by pressing
the M+/+<
SKIP/SEARCH
button.
_
m
Press the MEMORY
button.''PROG."
remains lit.
Select
disc 3 by pressing
the DISC 3 button.
m
m
/l\
.s
IFI
L
Pr.
ZJ
>=
Press the MEMORY
button.''PRO"."
remains lit.
Press the
/11 PLAY/PAUSE
button to start play.
c-
PIJY
EBizi
m
;CL
C2.
nrl
I
~
El
U.u
I
Wha
all programmed
selections
have been played, the player stops
automatically.
"O 0.00" appears
on the display.
-
%%e programme
contents
are retained in memory.
Any attempt
to programme
more than 32 selections
will result in
"FULL"
being displayed
and discontinuation
of the programming.
If a non-existent
disc or track number is programmed,
that disc or track
wifl be skipped
during play.
The programme
is cleared when the w STOP button is pressed in the
stop mode.
Checking the programme
Each
time
the MEMORY
button
is pressed
in the stop mode, the
progranuned
details sequentially
appear on the display.
Changing a programme
To add a new selection
to a programme:
1.
In the stop mode, press the MEMORY
button repeatedly until"- - --
.- -" is displayed.
2.
select
a disc and track number as explained
above.
3-
Press the MEMORY
button.
To chamge
a selection:
1.
h'! the stop mode,
press the MEMORY
button repeatedly
until the
sdection
to be replaced
is displayed.
2.
S@ect a disc and track number as explained
above.
3.
Press the MEMORY
button.
Note:
Prograrmrned
details cannot be partially deleted or inserted.
,
WHAT TO DO IF ...
If the aperation
of the unit or display is not normal, even though the
apprqdate
buttons have been pressed.
1.
%nnect
the mains lead.
2.
Press the RESET button (rear of the unit) for 30 seconds or more.
3.
C%rwrect the mains lead.
4.
Press the STANDBY/ON
or POWER button to turn the power on.
5.
Press
the desired function
button.
Note
[f the w'@ does not operate
correctly,
please contact
your nearest
SANYO
Authorized
Service Centre.
10
Advertisement
